Call Us Today 800-878-7827

TILE GASKET

TILE GASKET
Tile Gasket products are intended for those looking to improve the traditional effectiveness of a MDF downdraft set-up. These tiles eliminate vacuum leak by seal 85% of the board with a closed-cell gasket sheet. Then the remaining 15% surface area has a gasketed 1/4 hole to create vacuum with. Tiles are offered individually, or is set based on 4'x 8' layouts as well as 5' x 10' layouts. Each tile measures 12"x 16", with an adhesive backing. These tiles are intended to stick directly to the surface a Universal Downdraft Spoilboard. Each tile contains 192 individual 1/4" holes. These holes produce a vacuum clamp on a sheet, while also limiting vacuum loss as it seals the spoilboard. The question customers ask most often is how long does one set last? That depends on the operator. It is very important to read over the application notes. The Z depth adjustment is the biggest factor. When the Z depth is adjusted with care a user can maximize the longevity of the tiles for hundreds of operating hours. Application Notes can be found on our website. They are also included with each order. https://www.allstarcnc.com/resources/tile-gasketing/application-notes/how-to-apply-tile-gasket

Grid | List (1 to 3 of 3) « Prev | Next »
TG CR 03

TG CR 03

1/32" Thick Tiles Gasketing
$8.57
TG CR 06

TG CR 06

1/16" Thick Tile Gasketing
$10.11
TG CR 12

TG CR 12

1/8" Thick Tile Gasketing
$13.92
Grid | List (1 to 3 of 3) « Prev | Next »